While your favourite kind of floor is an issue of individual option, slate tiles would have to be near the top of the list, right? Slate is a wonderful and hard wearing natural rock product, that causes it to be perfect for flooring anyplace from a small entry to a hotel foyer. Slate is a metamorphic rock containing mainly of quartz, chlorite, mica and calcite. Since it is hollow straight from the source and after that just cut to size, slate retains its distinguishing features, colour variations and texture. Every one of those special characteristics and more are what make slate this appealing choice for designers and architects.
Also to its aesthetic qualities, slate tiles are normally slip resistant, non combustible, and impenetrable to water, the colors will not fade with time, slate is not affected by extremes of temperature and it is resistant to compounds. With lots of qualities going for it, it is hardly surprising that slate is getting more popualr as more home owners discover these unique properties and the most recent extensive array of color variations. It is the very characteristics that make slate tiles so distinguishing that also lead to difficulties if left in the hands of hobbyists. So let us look at the points you’ve to consider when laying slate tiles so you might have a floor you will be proud to display.
Slate floor tiles need to be placed on a solid surface that’s clean and rigid. Slate is an extremely inflexible material, so injury can happen if there is any motion. Remove all dirt particles, old adhesive, sealers, grease or paint. In case the floor you would like to tile has a lot more than a 3mm fall, thickset glues need to be used. Slate tiles normally vary in depth by up to 5mm, so you will have to make allowances in the number of adhesive and grout applied to get a flat surface. Due to the versions in thickness and also the number of colors in each tile, it can make good sense to remove all slate tiles from the pallets and complete a dry run’. Depending upon the look you would like to achieve, move the tiles around throughout the dry run till the tonal variations suit you. Aim to lay the thickest tiles towards the center of the area you’re tiling with the thinner tiles towards the edges. The thickest tiles may dictate the overall height, whilst the thinner tiles will need to be built up with additional adhesive.